Elite Water Heater Services

Why Is My Water Heater Leaking From a Pipe?

Water heater leaking from a pipe? Learn which pipes leak, why fittings fail, and when to call a provider.

A water heater leaking from a pipe usually means a fitting has loosened, a joint has corroded, or a pipe has cracked. The pipes around a heater — the cold water inlet, the hot water outlet, the relief valve discharge and the drain — all have joints that can fail with age, heat and water chemistry.

A pipe leak is usually repairable, and it is usually cheaper than a tank leak. The first job is to find which joint is leaking.

Finding the leaking pipe

Dry the pipes and the fittings, then watch where the water appears. A drip at a threaded joint means a loose or corroded fitting. A drip along a pipe usually means a crack or a failed solder joint. Water on the floor with no visible drip may be running down a pipe from higher up.

Note whether the leak is hot or cold water — it points to the inlet or the outlet side.

What to do

Turn off the water supply to the heater if the leak is heavy, mop up the water, and call a provider. Do not overtighten fittings — a cracked fitting leaks worse. A provider replaces the fitting or the section of pipe and tests the repair. Call (480) 919-8156 to check availability in your area.

Frequently Asked Questions

Usually, yes. A fitting can be tightened or replaced, and a cracked section of pipe can be cut out and replaced.

Usually a loose or corroded fitting, a failed joint, or a cracked pipe. Age, heat and water chemistry all play a part.

If it is flooding, yes — turn the water off and call a provider. A slow drip still deserves a fast call, because it can get worse.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156