Water Heater Temperature Setting
Water heater temperature setting: why 120°F is the recommended setting, when to go higher, and how to set it safely.
The water heater temperature setting is the single most important control on the unit. It decides how hot the water is, how much energy the heater uses, and how safe the water is to use.
The U.S. Department of Energy recommends 120°F (49°C) for most households. It is hot enough for showers and dishes, it reduces scalding risk, and it cuts standby heat loss.
Why 120°F
Water at 140°F (60°C) can scald in seconds. Water at 120°F takes minutes to scald, which gives time to react. Higher settings also waste energy: the heater loses more heat to the surrounding air, and the tank scales faster.
Households with an immunocompromised person or a dishwasher without a booster heater sometimes need a higher setting. If you do set it higher, fit a mixing valve so the taps stay at a safe temperature.
How to set it
On a tank unit, the thermostat is behind a panel — turn the power or gas off before opening it, and set both thermostats on an electric unit to the same temperature. On a tankless unit, the temperature is set on the display. Check the temperature at a tap with a thermometer after changing it. Call (480) 919-8156 to check availability in your area.
Frequently Asked Questions
120°F (49°C) for most households, per the U.S. Department of Energy.
For most households, yes — 140°F can scald in seconds and wastes energy. 120°F is the recommended setting.
The thermostat may have failed, or the temperature may be set higher than you think. A provider can test it.
Need Help With Your Water Heater?
Call (480) 919-8156 and describe what your water heater is doing. Elite will connect your request with an available independent local provider — the provider handles diagnosis, pricing, scheduling and the work directly with you.


